Design Optimization of Connection Section for Concentrated Force Diffusion

In many load carrying thin shell structures, a connection section is arranged to transfer concentrated external forces to its main section. It is very important for the concentrated external forces to diffuse as uniformly as possible. Nevertheless the traditional design of uniform radial rib is not optimized. The present paper studies an integrated optimization procedure for design optimization of connection section. Variance constraint of node forces at the interface between the main section and connection section is firstly proposed as the evaluation criterion of concentrated force diffusion efficiency and introduced into the topology optimization formulation. Afterwards, for improving the manufacturability of the final design the topology optimization results are interpreted and further optimized by size or shape optimization. Two strategies of interpretation are examined. The first strategy is called strategy of making holes, which inserts a number of internal holes of regular geometric features and smooth boundary with B-spline curves in the continuum based on the topology optimization result. In the second strategy, an initial truss-like design is extracted from the characteristic of topology optimization result. Then a further shape and sizing optimization is followed to obtain the final optimal design. An example of design optimization of plane connection section is presented. The effectiveness of the present approach is demonstrated. The respective advantages and disadvantages of the two strategies are discussed.     

一种用于数字助听器的WOLA滤波器组的设计准则

针对WOLA(weighted overlap-add)滤波器组在数字助听器多通道处理中的应用,本文提出了一个满足该领域要求的具体的设计准则。根据这一准则,可用窗函数法进行滤波器设计,并把问题简化为对窗长度的选取。对线性扫频信号和语音信号多通道放大两种情况进行了仿真,结果表明,适当选取窗长度,滤波器组输出信号将符合要求并且无混迭。     

水溶液中Cr^3＋的火焰原子吸收光谱法测试条件的优化

为优化火焰原子吸收光谱法测定水溶液中的Cr^3＋的测试条件,分别采用单因素简单比较法、正交实验设计极差分析及正交实验回归方法考察了光谱通带n,空心阴极灯电流I,燃烧器高度h以及乙炔/空气流量比P对于仪器灵敏度的影响。结果表明单因素简单比较法获得的实验条件最优。乙炔/空气流量比P对火焰原子吸收仪器灵敏度影响最大、其次是光谱通带n,燃烧器高度h和灯电流I的影响很小。测定水溶液中的Cr^3＋时仪器灵敏度最佳的实验条件为：乙炔/空气流量比P=0.4;光谱通带n=0.2nm;灯电流I=5mA;燃烧器高度h=5cm。     

微矩形槽平板热管的设计制造及性能分析

目前微槽平板热管成为热管研究和开发的重点。文中简要介绍了平板热管的设计要点及制造工艺,并通过实验,对设计制作的平板热管进行了性能测试。得出如下结论:该平板热管具有良好的启动特性和工作特性;在设计中要注意工质与管壳材料的相容性;制作时要严格控制清洗、检漏、充装等关键工序以保证制作质量。     

嫦娥一号卫星干涉成像光谱仪电子学设计

介绍了嫦娥一号卫星用于获取矿物光谱信息的干涉成像光谱仪电子学系统设计.概述了电子学系统的技术指标、系统组成、工作模式、外部接口和设计原则,详细描述了焦平面组件设计、视频处理和时序控制组件设计和EMC设计,给出部分正样产品实物照片以及地面实验和在轨飞行图像.各项地面试验和一年的在轨飞行结果表明该设计达到了预定的技术要求.     

The constructal unification of biological and geophysical design

Here we show that the emergence of scaling laws in inanimate (geophysical) flow systems is analogous to the emergence of allometric laws in animate (biological) flow systems, and that features of evolutionary “design” in nature can be predicted based on a principle of physics (the constructal law): “For a finite-size flow system to persist in time (to live) it must evolve in such a way that it provides easier and easier access to its currents”, meaning that the configuration and function of flow systems change over time in a predictable way that improves function, distributes imperfection, and creates geometries that best arrange high and low resistance areas or volumes. This theoretical unification of the phenomena of animate and inanimate flow design generation is illustrated with examples from biology (lung design, animal locomotion) and the physics of fluid flow (river basins, turbulent flow structure, self-lubrication). The place of this design-generation principle as a self-standing law in thermodynamics is discussed. Natural flow systems evolve by acquiring flow configuration in a definite direction in time: existing configurations are replaced by easier flowing configurations.     

毛细管电泳柱端安培检测装置的研制

研制了一种新型的毛细管电泳柱端型安培检测装置。以直径为6μm的碳纤维微电极为工作电极,在自组装的ACS-2000毛细管电泳仪上,考察了用不同内径毛细管分离时分离电压对背景噪声的影响。利用该装置同时测定了3种苯二酚的异构体。     

宽视场大相对孔径星敏感器光学系统设计

介绍了一种用于卫星姿态控制的星敏感器光学系统,该光学系统焦距为51 mm,相对孔径为1/1.1,视场角为21°×21°（圆视场2ω＝30°）,光谱范围为0.5～0.85 μm,采用了复杂化双高斯结构.与普通成像系统不同的是,该系统要求对不同光谱的恒星所采集到的点像能量中心是一致的,且星像点像的弥散圆须控制在一定的范围内.具有倍率色差小、轴上和轴外能量分布比较一致的特点.